2009年5月1日 星期五

以 fstab 自動掛載 Big5 編碼的 FAT 分割區

在 Ubuntu 要自動掛載分割區可以修改 /etc/fstab,在 fstab 中每一行代表一個檔案系統的設定。而每一行裡面又分為 6 個欄位,欄位之間以空白或 tab 作分隔:

<1 要掛載的裝置> <2 掛載到哪個目錄> <3 檔案系統的型態> <4 掛載的選項> <5 fs_freq> <6 fsck 檢查檔案系統時的順序>

自動掛載 FAT 分割區要在第 3 欄指定檔案系統的型態為 vfat,此外台灣地區 Windows 下繁體中文通常是以 Big5 來編碼,因此在第 4 欄的掛載選項中要加入 iocharset=utf8 以及 codepage=950 這兩個選項,否則掛載上去以後在 Nautilus 裡面的中文檔名可能變成亂碼,底下是從我 fstab 中擷取出來:

/dev/sda2 /media/sda2fat32 vfat owner,exec,dev,suid,rw,auto,umask=000,iocharset=utf8,codepage=950 0 0

其中第 4 欄的 umask 是用來指定檔案及目錄的權限,當 FAT 磁區被掛載上去了以後通常是無法直接用 chmod 來更改磁區內檔案及目錄的權限的,必需從 fstab 中先設好。umask=000 代表打開所有的權限,即 -rwxrwxrwx;而 umask=777 則代表關閉所有權限,即 ----------。所以 umask 的設定方式正好與 chmod 相反,umask=674 相當於 chmod 103,umask=257 相當於 chmod 520 依此類推…。如果檔案和目錄想要指定不同的權限,則可以分別以 fmask 及 dmask 來指定,打 man mount 然後搜尋 umask 可以找到 umask、fmask 及 dmask 的用法。

輸入命令 man fstab 可以看到更多 fstab 的詳細說明,第 4 欄的掛載選項的詳細說明則要打 man mount 去找。下面是我完整的 fstab,最後兩行掛載的就是 FAT 磁區:

# /etc/fstab: static file system information.
#
##  The following description is from 'man fsck':
##  
##    The root filesystem will be checked first unless the -P option is specified (see below).  After
##    that, filesystems will be checked in the order specified by the fs_passno (the sixth) field in
##    the /etc/fstab file.  Filesystems with a fs_passno value of 0 are skipped and are not checked at
##    all.  Filesystems with a fs_passno value of greater than zero will be checked in order, with
##    filesystems with the lowest fs_passno number being checked first.  If there are multiple
##    filesystems with the same pass number, fsck will attempt to check them in parallel, although it
##    will avoid running multiple filesystem checks on the same physical disk.
##    
##    Hence, a very common configuration in /etc/fstab files is to set the root filesystem to have a
##    fs_passno value of 1 and to set all other filesystems to have a fs_passno value of 2.  This will
##    allow fsck to auto- matically run filesystem checkers in parallel if it is advantageous to do
##    so.  System administrators might choose not to use this configuration if they need to avoid
##    multiple filesystem checks running in parallel for some reason --- for example, if the machine
##    in question is short on memory so that excessive paging is a concern.
##
##  Therefore, we should give a value, other than 0 and 1, to the fs_passno (the sixth) of swap, sda2
##  and sda5 if we want them to be checked.
#
#                
proc            /proc           proc    defaults        0       0
# /dev/sdb6
UUID=a0cf5674-f414-4841-b3f4-86a11c6826ce /               ext3    relatime,errors=remount-ro 0       1
# /dev/sdb7
UUID=8dd47df8-8c27-455f-806a-7b663184189d /data           ext3    relatime        0       2
# /dev/sdb5
UUID=f63c79dd-13d2-48f6-817d-7479ef87e0bc none            swap    sw              0       3
/dev/scd1       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0
#  FAT32
/dev/sda2 /media/sda2fat32 vfat owner,exec,dev,suid,rw,auto,umask=000,iocharset=utf8,codepage=950 0 0
/dev/sda5 /media/sda5fat32 vfat owner,exec,dev,suid,rw,auto,umask=000,iocharset=utf8,codepage=950 0 0

3 意見:

閒人 提到...

基本上用iocharset=utf8就差不多了

當然可能跟在下習慣有差
習慣用su -c "mount /dev/sda1 disk3 -o uid=xxx,iochatset=utf8"掛隨身碟
用su -c "umount disk3"卸載

Unknown 提到...

su -c ... 的用法和 sudo ... 的用法滿類似的,不過似乎 sudo 是以 superuser 登入 而 su 是以 root 登入

尚未在 ubuntu 上使用隨身碟 不過我以為隨身碟會自動被系統掛載上去 而不需手動下命令掛載

閒人 提到...

跟具之前玩過Fedor系列,是會自行掛載隨身碟

至於ubuntu就不了解了。

不過只要設定過後就可以自行掛載,大多應該都是自動掛載,並非都得打這麼長串文字